Fanvil PA2S SIP Video Intercom & Paging Gateway

Fanvil PA2S SIP paging gateway Key Features

• Exquisite, can be embedded in other equipment for internal installation
• Emergency call button interface, active call
• NVR video recording, standard RJ45 interface
• Recording output, 3.5mm standard audio interface
• Audio line out port, expandable external active speaker.
• 10W ~ 30W mono channel power amplifier output, according to the input voltage to setting the output power.
• Adaptive 10/100 Mbps network port, integrated PoE
• Compatible with major platforms: Asterisk, Broadsoft, 3CX, Metaswitch, Elastix, Avaya etc.

Generic

• 2 SIP lines
• Speed dial
• Linkage with IP camera to realize video intercom
• Oral announcement of the IP address(in English)
• MP3 broadcasting
• Support mono active speaker (audio line out)
• Support audio line in
• Talkback recording output
• Switch signal input and output
• Support programmable DSS key ports
• PoE enabled

Device functions

• Auto-answering
• Programmable DSS keys
• Through button or web page volume adjustment
• Network time synchronization
• Time plan (task management)
• Incoming call multicast
• Dynamic multicast function
• HTTP API
• Action URL / Active URI

Call functions

• Call out / answer / reject
• Call waiting
• Intercom, Multicast
• Speed dial
• Anonymous call (Hide caller ID)

Audio

• Narrowband codec: G.711A/U, G.729A/B, LBC, G.723, G.726-32K
• Wideband codec: G.722, Opus
• Full-duplex hands-free speakerphone with AEC
• DTMF: In-band, Out-of-Band (RFC2833/ SIP INFO)

Network

• Physical: 10/100 Mbps Ethernet
• IP mode:IPv4/IPv6/IPv4&IPv6
• IP configuration: Static IP / DHCP / PPPoE
• VPN: L2TP / OpenVPN
• VLAN
• LLDP
• Qos

Physical

• Keypad: 3 keys, including 2 volume control keys (Up/Down) and 1 reset key (soft reset)
• RJ45 port x2: connect the network / WAN port: connect the network, Power over Ethernet (IEEE 802.3af), class 3 / Camera port: connected to the original camera
• Blue LED x1: (SIP status and network status)
• Recording output port x1: connect audio device / Out: mixed output of local microphone voice and call voice recording / Port: 3.5mm standard audio port / Impedance: 15 Ohm
• Ground screw x1
• Passive speaker port x1: connect the speaker
• Output power:  4Ω, PoE/10W, 12V/10W, 18V/20W, 24V/30W; related to power supply voltage. / 8Ω, PoE/5W, 12V/5W, 18V/10W, 24V/15W; related to power supply voltage.
• Wire diameter: 18AWG or higher. / Port: terminal socket
• Line out port x1: connect the active speaker / Out: adjustable by volume, max up to 1.2Vpp. / Port: terminal socket
• DSS keys port x1: connect the external buttons (support LED) /     LED: Output 5.0Vdc/5mA. / Port: terminal socket
• MIC in / Line in port x1: connect the MIC or audio line in device / The multiplex port is microphone input by default, which be configured as audio line input function through software. / Electret condenser MIC is recommended /     Sensitivity: - 38dB, impedance 2.2k ohm, bias voltage 2.54Vpp / Port: terminal socket
• Short circuit input and output port x1 (built-in relay) / Relay: MAX DC30V / 2A, AC125V / 0.5A / Port: terminal socket
• 2 parallel power input DC port: DC power input / DC power input: DC12V~24V/2A / 1 road for the 5.5mm DC power seat / 1 road for the 2 Pin terminal socket
• Housing material: aluminum alloy
• Installation: Desktop stand / Wall-mounted
• Color: black
• Working temperature: -30℃~ 60℃
• Storage temperature: -30℃~ 60℃
• Working humidity: 10~95%
• Device dimensions: 113x83x28 mm
• Gift box dimensions: 147x114x58 mm
• Outer CTN dimensions: 310x248x322 mm (20 PCS)